New!

WDL-PLL (Wideband Dual Output LNB-PLL)

Features:

Specification SMW WDL-PLL


Frequency range	10.7 - 11.7 & 11.7 - 12.75 GHz
LO frequency	9.75 GHz (Low band)
	10.60 GHz (High band)
Output frequency	950 - 1950 MHz (Low band)
	1100 - 2150 MHz (High band)
Spurious signal in Low band	-60 dBm typ. @ 1700 MHz
High band	-70 dBm typ. @ 1700 MHz
Gain typ.	57 dB (50 dB min.)
Gain variation	±4 dB/each band
	±0.4 dB within 30 MHz
Noise Figure typ.	1.1 dB
LO radiation	-60 dBm
Image rejection	40 dB min.
P1 dB typ.	+15 dBm
IP3 typ.	+25 dBm
Input flange	WR-75 waveguide
Output connectors	F-connectors 75 ohm,
	N-connectors 50 ohm or
	SMA-connectors 50 ohm
Input VSWR	2.3:1
Output VSWR	2.1:1
DC power	12-20 VDC / 370 mA max. (either one output or both outputs)
Operating temperature	-40 to +80°C
Storage temperature	-40 to +80°C
Dimensions	122 (127 N) x 56 x 44 mm
Weight	335 g (F-connectors)
	371 g (N-connectors)

	Internal reference
*LO Stability (over temp.)**	±10 kHz (±1 ppm) or ±25 kHz (±2.5 ppm)
LO Phase noise typ.	-75 dBc @ 1 kHz
	-78 dBc @ 10 kHz
	-90 dBc @ 100 kHz
	-120 dBc @ >1 MHz

Option	SMA-input (via transition)

Enclosed accessories	O-ring
	Screw M4 x 8 mm 4 pcs

* ±10 kHz within -10° to +70°C

±25 kHz within -40° to +60°C