Professional Quattro from Swedish Microwave AB

SMW Quattro DRO

quattrosk

Features:

• Low Phase Noise

• Low Noise Figure

• Wide Frequency Range

• F-or N-connector outputs

• High cross polarization

SMW	Quattro DRO type E	Quattro DRO type B
Frequency range	10.7 - 12.75 GHz	10.95 - 12.75 GHz
LO frequency	9.75 GHz (Low band) 10.6 GHz (High band)	10.0 GHz (Low band) 10.75 GHz (High band)
Output frequency	950 - 1950 MHz (Low band) 1100 - 2150 MHz (High band)	950 - 1750 MHz (Low band) 950 - 2000 MHz (High band)
Spurious signals	low band -60 dBm typ. @ 1700 MHz high band -70 dBm typ. @ 1700 MHz	low band -60 dBm typ. @ 1500 MHz high band -70 dBm typ. @ 1500 MHz

General Specification

Noise figure typ.	0.9 dB
Gain typ.	52 dB
Gain variation	±4 dB each band, ±0.4 dB within 30 MHz
LO stability (over temp.)	±3 MHz
Aging drift	±500 kHz max
Phase noise typ	-75 dBc @ 1 kHz -95 dBc @ 10 kHz -110 dBc @ 100 kHz -115 dBc @ > 1 MHz
Input	Circular waveguide 18 mm
Cross polarization	31.5 dB min
LO radiation	-60 dBm
Image rejection	50 dB min
P1dB	+5 dBm
IP3	+15 dBm
DC power	12-24V / 180 mA typ on each polarization (the DC can be feed through any of the two connectors of each polarization. The LNB chooses the output on each polarization with the highest voltage input)
Operating temperature	-30 to +60°C
Storage temp. range	-40 to +80°C
Output connectors (waterproof)	F-connectors 75 ohm or N-connectors 50 ohm
Input VSWR	1.5:1 max
Output VSWR	2:1 max
Weight	1675 g (F-connectors) 1750 g (N-connectors)
Options	High stability LO, ±1 MHz over temp. High stability LO, ±1.5 MHz over temp. High stability LO, ±2 MHz over temp. Low gain (NF >1.0 dB typ.)
Accessories	Adapter C120/C120, see Feedhorn leaflet Adapter Prodelin, see Feedhorn leaflet