Q-PLL LNB (Multiband)

• Ideal for Marine, SNG, VSAT and On-The-Move applications
• Full Ku-band
• 2-, 3- or 4-band by switching the Voltage only, Tone only or Voltage + Tone
• Internal High LO-stability or External 10 MHz reference 

 

Click here to download the product sheet

    

 

 

Specification SMW Q-PLL

​

Standard LO frequency (max. 4) ​	9.75, 10.00, 10.25, 10.50, 10.60, 10.7, 10.75, 10.80, 11.0, 11.05, 11.20, 11.25 and 11.30 GHz
Standard IF Frequency	Depens on the LO's (950 - 1450 to 2150 MHz (will be specified from the LO's choosen)
Typical Specification Internal reference
LO stability (over temp.*)	±10 kHz (±1 ppm) or ±25 kHz (±2.5 ppm)
LO Phase noise typ.	-75 dBc @ 1 kHz
	-78 dBc @ 10 kHz
	-90 dBc @ 100 kHz
	-120 dBc @ >1 MHz
Switching 2-band  via Voltage (V)	Band 1 11.5 - 14.0 V, No Tone
	Band 2 16.0 - 19.0 V, No Tone
Switching 2-band  via Tone (T)	Band 1 No Tone, 11.5 - 20.0 V
	Band 2 Tone 22 kHz, 11.5 - 20.0 V
Switching 3-band  via Voltage (V)	Band 1 11.5 - 13.7 V, No Tone (option 13 V)
	Band 2 13.9 - 16.8 V, No Tone (option 18 V)
	Band 3 17.0 - 19.0 V, No Tone (option 24 V)
Switching 3-band  via Voltage (V) and Tone (T)	Band 1 11.5 - 14.0 V, No Tone
	Band 2 11.5 - 14.0 V, Tone 22 kHz
	Band 3 16.0 - 19.0 V, No Tone
Switching 4-band  via Voltage (V) and Tone (T)	Band 1 11.5 - 14.0 V, No Tone
	Band 2 11.5 - 14.0 V, Tone 22 kHz
	Band 3 16.0 - 19.0 V, No Tone
	Band 4 16.0 - 19.0 V, Tone 22 kHz
Specification External 10 MHz reference
LO stability (over temp.)	Depends on the external reference
External reference input frequency	10 MHz
External reference input power	-5 to +10 dBm
External reference input port	Output IF connector
	Option via sep. connector (F, N or SMA)
LO Phase noise typ.	-70 dBc @ 10 Hz
	-70 dBc @ 100 Hz
	-75 dBc @ 1 kHz
	-78 dBc @ 10 kHz
	-90 dBc @ 100 kHz
	-120 dBc @ >1 MHz
Switching 2-band  via Voltage (V)	Band 1 11.5 - 14.0 V, No Tone
	Band 2 16.0 - 19.0 V, No Tone
Switching 2-band  via Tone (T)	Band 1 No Tone, 11.5 - 20.0 V
(ext. 10 MHz ref. via sep. input connector)	Band 2 Tone 22 kHz, 11.5 - 20.0 V
Switching 3-band  via Voltage (V)	Band 1 11.5 - 13.7 V, No Tone (option 13 V)
	Band 2 13.9 - 16.8 V, No Tone (option 18 V)
	Band 3 17.0 - 19.0 V, No Tone (option 24 V)
Switching 3-band  via Voltage (V) and Tone (T)	Band 1 11.5 - 14.0 V, No Tone
(ext. 10 MHz ref. via sep. input connector)	Band 2 11.5 - 14.0 V, Tone 22 kHz
	Band 3 16.0 - 19.0 V, No Tone
Switching 4-band  via Voltage (V) and Tone (T)	Band 1 11.5 - 14.0 V, No Tone
(ext. 10 MHz ref. via sep. input connector)	Band 2 11.5 - 14.0 V, Tone 22 kHz
	Band 3 16.0 - 19.0 V, No Tone
	Band 4 16.0 - 19.0 V, Tone 22 kHz
General specification
Gain typ.	58 dB (53 dB min.)
Gain variation within 30 MHz max.	±0.4 dB
Gain variation max.	±4 dB
Noise Figure typ.	0.8 dB
LO radiation	-60 dBm
Image rejection	40 dB min
P1dB typ.	+15 dBm
IP3 typ.	+25 dBm
Input	WR-75 waveguide (R120)
Output, waterproof	F-connector 75 ohm,
	N-connector 50 ohm or
	SMA-connector 50 ohm
Input VSWR	2.3:1 max
Output VSWR	2.1:1 max
Current	270 mA typ.
Operating temperature	-40 to +80°C
Storage temperature	-40 to +80°C
Dimensions	122mm (127mm N-connector) x 56mm x 44 mm
Weight	329 g (F- & SMA-connector)
	345 g (N-connector)
Specification Tone Switching
Switching	No tone / 22 kHz ±4 kHz
Amplitude voltage	0.6 ±0.2 V
Duty cycle	40-60%
Options	Voltage switching 13/18/24 V (240/190/150 mA typ.)
	Separate DC power input (F, N or SMA)
	Customized gain and variation
	Customized LOs
	Extended frequency range
	Separate input connector for the ext. 10 MHz ref.
	SMA-input (via transition)
Attached accessories	O-ring
	Screw M4 x 8 4 pcs
	​

 

* ±10 kHz within temp. range within -10° to +70°C

   ±25 kHz within temp. range within -30° to +60°C

 

 

How to order Q-PLL Ku-band (if you can't find your model please ask for a quote)